Meyra 2.432 Especificações descarregar pdf (Página 12)

12

Continuous legrests

Code 54

(Fig.18+19)

The continuous legrests can be folded up

to the side.

The adjustment of height and angle is

effected via the adjusting screws (A, Fig.

18).

Depth adjustment is effected via the ad-

justing screws (B, Fig. 18).

Legrests for amputees

Code 52

(Fig.58+59)

Functions and procedure identical to

standard legrests.

– Loosen the locking screw to adjust the

height (B).

– After disassembly of the screws ( C )

the legrest pad can be assembled in

another position.

– Loosen the clamp lever (D) to adjust

the angle.

Angle adjustable foot plates

Code 808

(Fig.10)

Handling:

Tools

Hexagonal stud wrench WW* 5

– Move the brake release lever to the

"drive" position. This will prevent the

wheelchair from inadvertently rolling

away.

– Loosen screw connection (A) at the

pivot of the footrest

– Adjust the foot plate to the required

angle. – To do so, separate the teeth

of the angle adjustment mechanism.

– Tighten screw connection (A)

ARMRESTS

The armrests (3) generally have padded

armrests. They are lockable and de-

tachable, as well as adjustable in

height, (Fig. 21).

Benefits:

– Adjusting screws prevent the side

parts from inadvertently sliding out

– Mudguard

– Wind protection.

– Lateral support for body

– Relaxation of the shoulder muscles

due to padded height adjustable

armrests.

Note!

The side parts are movable and de-

tachable and are not suitable for lif-

ting or carrying the wheelchair (see

warning sign on side parts)!

Removing the armrests

– Switch off the wheelchair and move

the brake release lever to the "drive"

position. – This prevents the

wheelchair from rolling away acci-

dentally.

– Lift out the side part. – This is

carried out by loosening the relevant

adjusting screw (A, Fig. 21) on the

clamping guide.

Note!

Removed side parts must be carefully

replaced before the wheelchair is

used again!

Never use the wheelchair unless the

side parts are mounted.

Adjustment of seat width

– Switch off the wheelchair and move

the brake release lever to the "drive"

position. – This prevents the

wheelchair from rolling away acci-

dentally.

– Push the side part outwards/in-

wards. – This is carried out by loose-

ning the relevant adjusting screw (A,

Fig. 23) on the clamping guide.

Only push the side part outwards as

far as the guide mark!

Note!

Check that the brake release lever is

functioning.

– Tighten adjusting screw (A, Fig. 23)

again. – Ensure that it is secured.

Adjustment of seat width via the

armrest

By removing the screws (A, fig. 24), it is

possible to adjust seat width by moving

the armrest. After that each side pad

Code 959 has to be fixed.

Side pad Code 959

The side pad is fixed on the armrest by

Velcro strips (Fig. 5).

Height adjustment of the armrests

The padded armrests on the side parts

are progressively adjustable in height.

LEGRESTS

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

Comentários a estes Manuais

Sem comentários