Meyra 2.432 Especificações descarregar pdf (Página 16)

16

SAFETY BELT

Code 833

The purpose of the safety belt is to strap

in the wheelchair user.

Benefits:

– Additional stabilization of the sitting

position.

– Prevents user from falling forward out

of the wheelchair (depending on de-

gree of disability).

– Continuous adjustment to suit the

user’s needs.

Note!

Subsequent fitting of a safety belt may

only be undertaken by your specialist

dealer.

Both ends of the belt are screwed

onto the side of the frame with a brak-

ket.

Fastening the safety belt

The quick-release fastener of the safety

belt facilitates easy and quick fastening

and unfastening.

– Pull belt straps to the front.

– Close belt in front of the body. Insert

the catch tongue deep into the catch

mechanism until it audibly clicks (pull

to check fastness!).

Note!

Make sure that no objects are trap-

ped between belt and the body! –

Thus you avoid painful pressure points

Opening the safety belt

– Unfasten the safety belt by pressing

the red release key on the latch me-

chanism (see Fig.53).

Belt adjustment:

– Hold latch mechanism at a right-ang-

le to the belt.

– Pull the belt in the relevant direction

for lengthening or shortening.

– Secure excess belt material by mo-

ving the plastic slide.

Note:

The safety belt should be a tight but

not too taut.

LIGHTING CODE 932

Function

The following functions can be selected

via the supplementary box on the con-

trol box (Fig. 60):

A = Hazard warning lights on/off

B = Left/right indicator

C = Horn

D = Light on/off

E = Fuse

Control box/side part

Before removing the control box or side

part, unscrew the connector plug for the

rear light (A, Fig. 61) and remove.

When installing the control box or side

part, insert connector plug (A) and

screw down. – Check that the lights are

working.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Comentários a estes Manuais

Sem comentários