Meyra 2.432 Especificações descarregar pdf (Página 8)

8

PREPARING THE

WHEELCHAIR FOR

OPERATION

Follow the instructions below in the

stated order.

1. Shift to drive mode.

Push the brake release lever

forward into drive mode, (Fig. 3).

Note!

Do not switch to push mode when the

wheelchair is in operation!

2. Check battery plug connection

The battery plug for main power

supply is in front of the battery

cover under the crossbrace,

(Fig.6).

3. Position of the control box

The control box should be

positioned in such a way that you

can comfortably and safely steer

the wheelchair.

Longitudinal adjustment:

Loosen adjustment screw (A, Fig. 7).

Height adjustment

The height positioning of the control box

is adjusted by way of adjusting screw (B,

Fig. 7) on the height adjustable armrest,

(also refer to the section entitled "Side

Parts").

Do not forget to

tighten the adjusting screws again.

PRE-OPERATION

CHECKS

PRE-SELECTION OF FINAL SPEED

The pre-selectable maximum final

speed is set by way of the dial (20) on

the control box (Fig. 2), either while the

wheelchair is stationary or in motion.

Note!

When travelling up or downhill

adapt and

reduce speed

in accor-

dance with gradient.

Never exceed

the admissible maximum speed (de-

pending on model

of 6 km/h

). –

Danger of accidents!

Have you selected an appropriate

maximum final speed?

The maximum final speed should reflect

the given conditions.

Note!

Risk of accident

by the selection of

an

inappropriate maximum final

speed setting!

Always select a

low final speed

in

driving situations which you do not feel

comfortable with (e.g. operation in-

confined spaces

or travelling uphill

on

ramps

etc.).

5. Switch on control box

Press the I/O button (17) on the

control box, (Fig. 8).

– The LED on the battery control

display (19) lights up. (Also refer to

the section entitled

"Control

Box"

).

6. Setting final speed

The pre-selectable final speed is

set by way of the dial (20) on the

control box (Fig. 2).

Low final speed

Turn the dial in an anticlockwise

direction as far as it will go.

High final speed

Turn the dial in a clockwise

direction as far as it will go.

Note!

• Risk of accident by the selection of

an inappropriate maximum final

speed setting!

Select a low final speed in driving

situations which you do not feel

comfortable with (e.g. operation in

confined spaces or on hills, e.g. on

ramps).

Always check the following before

setting off:

–

battery charging status

– the

selected maximum speed

.

(Please refer to section entitled

"

Control Box

").

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 37 38

Comentários a estes Manuais

Sem comentários